Micromanufacturing Technique That Might Shrink Medical Sensors

Micromanufacturing Technique That Might Shrink Medical Sensors

COLLEGE PARK, Md. – University of Maryland Chemistry Professor John Fourkas and his research group have developed new materials and nanofabrication techniques for building miniaturized versions of components needed for medical diagnostics, sensors and other applications. These miniaturized components — many impossible to make with conventional techniques — would allow for rapid analysis at lower cost and with small sample volumes.

Fourkas and his team have created materials that allow the simultaneous 3D manipulation of microscopic objects using optical tweezers and a unique point-by-point method for lithography (the process of using light in etching silicon or other substrates to create chips and other electronic components). As they report in a research article published in the August issue of Chemical Science , the combination of these techniques allows them to assemble complex 3D structures from multiple microscopic components.

Click here for larger image.Image by John Fourkas, University of Maryland

This work builds on earlier breakthroughs by Fourkas and his team in the use of visible light for making tiny structures for applications such as optical communications, controlling cell behavior and manufacturing integrated circuits.

“These materials have opened the door to a suite of new techniques for micro and nanofabrication,” says Fourkas. “For instance, we have been able to perform braiding and weaving with threads that have a diameter that is more than 100 times smaller than that of a human hair.” In the paper, Fourkas and his group also showcase 3D structures composed of glass microspheres, a microscopic tetherball pole, and a microscopic needle eye that has been threaded.

“One of the exciting aspects of this set of techniques is that it is compatible with a wide range of materials. For instance, we can weave together threads with completely different compositions to create functional microfabrics or build microscopic devices `brick by brick’ with building blocks that have different chemical or physical properties.”

Click here for larger image.Image by John Fourkas, University of Maryland

In addition to being enabling technologies for the creation of microscopic analytical and diagnostic devices, Fourkas foresees these techniques being valuable in the study and control of the behavior of individual cells and groups of cells.

Simultaneous microscale optical manipulation, fabrication and immobilisation in aqueous media was authored by Farah Dawood, Sijia Qin, Linjie Li, Emily Y. Lin and John T. Fourkas.

The authors acknowledge the support of the UMD and National Science Foundation (NSF)-supported Materials Research Science & Engineering Center. Learn more about research in the Fourkas laboratories.

COLLEGE PARK, Md. – University of Maryland Chemistry Professor John Fourkas and his research group have developed new materials and nanofabrication techniques for building miniaturized versions of components needed for medical diagnostics, sensors and other applications. These miniaturized components — many impossible to make with conventional techniques — would allow for rapid analysis at lower cost and with small sample volumes.

Fourkas and his team have created materials that allow the simultaneous 3D manipulation of microscopic objects using optical tweezers and a unique point-by-point method for lithography (the process of using light in etching silicon or other substrates to create chips and other electronic components). As they report in a research article published in the August issue of Chemical Science , the combination of these techniques allows them to assemble complex 3D structures from multiple microscopic components.

Click here for larger image.Image by John Fourkas, University of Maryland

This work builds on earlier breakthroughs by Fourkas and his team in the use of visible light for making tiny structures for applications such as optical communications, controlling cell behavior and manufacturing integrated circuits.

“These materials have opened the door to a suite of new techniques for micro and nanofabrication,” says Fourkas. “For instance, we have been able to perform braiding and weaving with threads that have a diameter that is more than 100 times smaller than that of a human hair.” In the paper, Fourkas and his group also showcase 3D structures composed of glass microspheres, a microscopic tetherball pole, and a microscopic needle eye that has been threaded.

“One of the exciting aspects of this set of techniques is that it is compatible with a wide range of materials. For instance, we can weave together threads with completely different compositions to create functional microfabrics or build microscopic devices `brick by brick’ with building blocks that have different chemical or physical properties.”

Click here for larger image.Image by John Fourkas, University of Maryland

In addition to being enabling technologies for the creation of microscopic analytical and diagnostic devices, Fourkas foresees these techniques being valuable in the study and control of the behavior of individual cells and groups of cells.

Simultaneous microscale optical manipulation, fabrication and immobilisation in aqueous media was authored by Farah Dawood, Sijia Qin, Linjie Li, Emily Y. Lin and John T. Fourkas.

The authors acknowledge the support of the UMD and National Science Foundation (NSF)-supported Materials Research Science & Engineering Center. Learn more about research in the Fourkas laboratories.

Source : http://www.newsdesk.umd.edu/scitech/release.cfm?ArticleID=2734

Related Posts Plugin for WordPress, Blogger...
Be Sociable, Share!

About the Author

has written 1822 posts on this blog.

Copyright © 2017 Medical Technology & Gadgets Blog MedicalBuy.net. All rights reserved.
Proudly powered by WordPress. Developed by Deluxe Themes