T2100 Treadmill for GE Stress Monitors

The GE T2100 treadmill remains among the best treadmills on the market. The T2100 is safe, reliable, and high performing, allowing practices to receive maximum return on their investment. Offering a wide walking tread and the ability to hold patients weighing up to 450 pounds, the GE T2100 treadmill is sure to please everyone. Also, the GE T2100 is compatible with all of GE’s stress test monitors.
Additional features and benefits of the GE T2100 include, but are not limited to, the following:

60 inch wide walking tread
Two modes for stopping
Front Handrails
Emergency stop
Speeds as high as 13.5 mph
Grades as steep as 25%
GE T2100 three horsepower motor
Self-calibrating
Digital control

Dimensions:
Weight: 400 lbs/ 181.4 kg
Walking Area: 18 x 60 in/45.7 x 152.4 cm
Floor Space Required: 29 x 77 in/73.7 x 195.6cm
Walking Surface Height: 5.5 in/14 cm
Handrail Height Above Walking Surface: Front – 40 in/101.6 cm

Power Requirements:
200 to 240 VAC, 50– 60 Hz, single phase, 20 A, NEMA 6-20 R wall outlet
Power Consumption: 1540 watts, 16 A

Performance Specifications:
Maximum Rated Load: 182 kg (450 lbs)
Drive Motor: 3.0 HP, brushless, DC motor
Elevation Motor: 0.13 HP
Belt Speed Range: 0.0 to 22.5 km/h (0 to 13.5 mph) at 220 V, @ 50/60 Hz
Belt Speed Tolerance: 1.6 km/h; ±0.16 km/h (1 mph; ±.09 mph)
Belt Speed Acceleration/Deceleration: Approximately 0.8 km/sec (0.5 mph/sec)
Elevation Range: 0.0 to 25.0% grade, continuously variable
Elevation Range Increase/Decrease: 1.14%/sec. @ 60 Hz
Maximum Leakage Current: 100 μA, chassis to ground
Interface: Either RS-232 port or RS-422 serial port, 9600 baud

Add to Wishlist
Add to Wishlist

Reviews

There are no reviews yet.

Be the first to review “T2100 Treadmill for GE Stress Monitors”

Your email address will not be published. Required fields are marked *